Kingston HyperX Fury HX426C15FBK2/16 is a kit of two 1Gx64-bit (8GB) DDR4-2666 CL15 SDRAM 2Rx8, memory module, based on sixteen 512Mx8-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Total kit capacity is 16GB. Each module has been tested to run at DDR4-2666 at a low latency timing of 15-17-17 at 1.2V.

Feature:

• Power Supply: VDD = 1.2V Typical
  
• VDDQ = 1.2V Typical
  
• VPP - 2.5V Typical
  
• VDDSPD = 2.2V to 3.6V
  
• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
  
• Low-power auto self refresh (LPASR)
  
• Data bus inversion (DBI) for data bus
  
• On-die VREFDQ generation and calibration
  
• Dual-rank
  
• On-board I2 serial presence-detect (SPD) EEPROM
  
• 16 internal banks; 4 groups of 4 banks each
  
• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
  
• Selectable BC4 or BL8 on-the-fly (OTF)
  
• Fly-by topology
  
• Terminated control command and address bus
  
• Height 1.340" (34.04mm), w/heatsink